Skip links

Steel I-Beams & H-Beams

Structural Steel Sections | International Sourcing & Trading

Send a message

    Product Description

    Steel I-beams and H-beams are hot-rolled structural steel sections used in buildings, bridges, industrial facilities, and infrastructure projects. Their cross-sectional geometry, dimensions, steel grade, and mechanical properties determine their suitability for specific structural applications. ROSHA STEEL facilitates the international sourcing and trading of structural steel beams according to buyers’ technical specifications, required quantities, and agreed commercial terms.

    Types of Structural Steel Beams

    • IPE Sections: IPE sections are European I-shaped beams with parallel flange faces, commonly specified for structural beams and steel frameworks.
    • HEA Sections: HEA sections are wide-flange H-shaped steel sections with relatively lighter cross-sections within the HE family, used in various structural applications.
    • HEB Sections: HEB sections are wide-flange structural sections with heavier cross-sections than corresponding HEA sizes, commonly used in columns and load-bearing structures.
    • HEM Sections: HEM sections are heavy wide-flange steel sections intended for structural applications requiring higher section capacity, subject to engineering design requirements.

    Technical Specifications

    Parameter Specification
    Product Structural Steel I-Beams & H-Beams
    Section Types IPE / HEA / HEB / HEM
    Manufacturing Method Hot Rolling
    Section Designation As per Required Section Series & Size
    Section Depth As per Selected Section Designation
    Flange Width As per Selected Section Designation
    Web Thickness As per Selected Section Designation
    Flange Thickness As per Selected Section Designation
    Length Typically 6 m / 12 m; Other Lengths Subject to Availability
    Steel Grade As per Buyer Requirements & Applicable Standard
    Dimensional Standards EN 10365 / EN 10034 / Other Applicable Standards
    Material Standards EN 10025 Series / ASTM A36/A36M / Other Applicable Standards
    Surface Condition Mill Finish / Painted / Galvanized, As Agreed
    Country of Origin Subject to Confirmation
    Quality Documentation As Agreed for Each Shipment
    Availability Subject to Supplier Confirmation

    Section dimensions, steel grades, applicable standards, surface conditions, and availability are subject to supplier confirmation and mutual agreement.

    Steel Grades & Applicable Standards

    Structural steel beams may be specified in different steel grades depending on the applicable material standard and project requirements. Common examples include S235JR, S275JR, and S355JR under the relevant EN 10025 specifications, as well as ASTM A36 where applicable. Section dimensions and tolerances must be verified against the relevant dimensional standard and selected section designation.

    Chemical Composition & Mechanical Properties

    Chemical composition and mechanical properties, including yield strength, tensile strength, and elongation, vary according to the selected steel grade, product thickness, and applicable material standard. Grade-specific chemical analysis, mechanical test results, and available mill test certificates may be provided upon request, subject to supplier confirmation.

    Structural & Industrial Applications

    Steel Building Frameworks
    Industrial Structures & Warehouses
    Bridges & Infrastructure Projects
    Columns & Structural Beams
    Machinery Support Structures
    Selection of the appropriate section and steel grade must be based on project design requirements and applicable engineering standards.

    Request a Technical & Commercial Offer

    Share your required beam type, section designation, steel grade, length, quantity, destination, and preferred delivery terms to request a tailored technical and commercial offer.