Steel Plates
Flat Steel Solutions for Fabrication & Engineering
Steel sheets and plates are flat steel products supplied in specified dimensions for fabrication, structural engineering and industrial processing. Their suitability depends on steel grade, thickness, dimensional accuracy, surface condition and required mechanical performance. ROSHA STEEL facilitates international sourcing and trading of steel sheets and plates according to defined technical specifications, quality requirements and commercial terms.
Steel Sheets & Plates — Product Range
01. Hot-Rolled Steel Sheets Hot-rolled steel sheets are flat steel products suitable for general fabrication, forming, machinery components and industrial processing. Key Technical Parameters -Grade: Commercial, drawing or structural grades, as applicable -Thickness, Width & Length: As specified -Surface Condition: As-rolled, pickled or oiled, where applicable -Chemical Composition & Mechanical Properties: Grade-specific -Reference Standard: ASTM A1011/A1011M, where applicable. 02. Cold-Rolled Steel Sheets Cold-rolled steel sheets offer controlled dimensional characteristics and surface finishes for applications requiring precise forming and fabrication. Key Technical Parameters -Grade: Commercial, drawing or other specified grades -Thickness, Width & Length: As specified -Surface Finish: According to purchase requirements -Formability & Mechanical Properties: Grade-specific Reference Standard: ASTM A1008/A1008M, where applicable. 03. Structural Steel Plates Structural steel plates are used in load-bearing fabrication, industrial structures, bridges and general engineering applications, subject to the applicable design and material requirements. Example Grades: ASTM A36; EN 10025 S235 / S275 / S355, with the applicable product standard and subgrade specified. Key Technical Parameters -Plate Thickness, Width & Length -Yield & Tensile Strength -Chemical Composition -Weldability and Impact Requirements, where applicable -Surface Quality & Dimensional Tolerances Reference Standards: ASTM A36/A36M or applicable EN 10025 series specifications. 04. Pressure Vessel Steel Plates Pressure vessel steel plates are specified for suitable pressure equipment applications requiring controlled mechanical properties and, where applicable, notch toughness. Example Grades: ASTM A516 Grade 60 and Grade 70. Key Technical Parameters -Plate Thickness, Width & Length -Chemical Composition -Yield & Tensile Strength -Impact Toughness, where required -Heat Treatment & Inspection Requirements, where applicable Reference Standard: ASTM A516/A516M.
Reference Mechanical Properties
| Grade | Reference Tensile Strength |
|---|---|
| ASTM A516 Grade 60 [415] | 415–550 MPa |
| ASTM A516 Grade 70 [485] | 485–620 MPa |
The above are specified tensile strength ranges under ASTM A516/A516M, not actual test results. Other mechanical properties and acceptance criteria must be verified against the applicable standard and product thickness.
Technical Specifications & Chemical Analysis
| Parameter | Specification |
|---|---|
| Product Form | Cut-to-Length Sheets / Plates |
| Product Type | Hot-Rolled / Cold-Rolled / Structural / Pressure Vessel |
| Steel Grade | As specified |
| Thickness | As specified |
| Width | As specified |
| Length | As specified |
| Dimensional Tolerances | According to applicable standard |
| Chemical Composition | Grade-specific |
| Mechanical Properties | Grade-specific |
| Surface Condition | As agreed |
| Inspection Requirements | According to product specification |
Chemical analysis must be evaluated against the selected grade and applicable standard, including the required limits for carbon, manganese, silicon, phosphorus, sulfur and other relevant elements.
Quality Assurance & Documentation
Inspection may include chemical analysis, tensile testing, dimensional verification, surface examination, ultrasonic testing and impact testing, as applicable to the selected product and contractual requirements. Relevant documentation may include mill test certificates, heat identification records, inspection reports and third-party inspection certificates. For pressure equipment applications, compliance with the applicable design code and required material certification must be established independently.
Applications
Steel sheets and plates are used in: Industrial Fabrication and Manufacturing Structural Steel Construction Machinery and Equipment Tanks and Industrial Components Bridges and Infrastructure Pressure Equipment, Where Appropriately Specified Technical & Commercial Inquiry Source Steel Sheets & Plates for Your Project Share your required product type, steel grade, thickness, width, length, quantity, intended application, inspection requirements and delivery destination with ROSHA STEEL to discuss sourcing possibilities and international supply arrangements.
